Blog

The TunnelYard blog

Guides, explainers and product updates for people who run IPsec.

Articles

Palo Alto IPsec VPN configuration: site-to-site example for PAN-OS 11

A complete PAN-OS 11.x example with GUI paths and set commands: crypto profiles, IKE gateway, tunnel interface, routing, policies, proxy IDs and checks.

IPsec VPN server setup: choices and a strongSwan walkthrough

What an IPsec VPN server does, the decisions to make before you build one, and a step-by-step strongSwan setup on Ubuntu 24.04 for a site-to-site peer.

IPsec VPN configuration examples for six platforms

Six IPsec VPN config examples on one shared network: the values both ends must match, route-based vs policy-based per vendor, and links to each full guide.

MikroTik IPsec VPN: site-to-site config for RouterOS 7

A complete RouterOS 7 example for an IKEv2 site-to-site tunnel, including the NAT and FastTrack rules most guides miss, verification and common problems.

strongSwan site-to-site VPN with swanctl.conf: a full example

A copy-pasteable IKEv2 site-to-site config for strongSwan with swanctl.conf, plus a route-based XFRM variant, verification and fixes for common problems.

IKEv1 or IKEv2: which should you use for your VPN?

Why IKEv2 is the default for new tunnels, and when you still need IKEv1.

Get a static IP for your office

Launch a gateway, connect your firewall, and allow-list one IP today.