Blog

The TunnelYard blog

Guides, explainers and product updates for people who run IPsec.

Articles

strongSwan site-to-site VPN with swanctl.conf: a full example

A copy-pasteable IKEv2 site-to-site config for strongSwan with swanctl.conf, plus a route-based XFRM variant, verification and fixes for common problems.

Read the guide

MikroTik IPsec VPN: site-to-site config for RouterOS 7

A complete RouterOS 7 example for an IKEv2 site-to-site tunnel, including the NAT and FastTrack rules most guides miss, verification and common problems.

pfSense IPsec VPN: site-to-site example configuration

Every Phase 1 and Phase 2 field for an IKEv2 site-to-site tunnel on pfSense, plus firewall rules, MSS clamping, the VTI option and how to check it works.

IPsec troubleshooting: why your VPN is not connecting, phase by phase

Reachability, IKE SA and child SA errors, tunnels with no traffic, MTU and flapping: what each symptom means and the commands to check it on each platform.

Cisco IPsec VPN configuration: IKEv2 VTI example for IOS XE

A complete IOS XE 17.x example of a route-based IKEv2 tunnel: proposal with PRF, keyring, IPsec profile, VTI, routing, verification and common problems.

FortiGate site-to-site IPsec VPN configuration for FortiOS 7.4

A complete FortiOS 7.4 CLI example of a route-based IKEv2 site-to-site VPN: phase 1 and 2, tunnel interface, static route, policies both ways and checks.

Palo Alto IPsec VPN configuration: site-to-site example for PAN-OS 11

A complete PAN-OS 11.x example with GUI paths and set commands: crypto profiles, IKE gateway, tunnel interface, routing, policies, proxy IDs and checks.

Get a static IP for your office

Launch a gateway, connect your firewall, and allow-list one IP today.