Static IP for SaaS allow-lists

A static IP your SaaS apps can allow-list

Many business apps let you limit sign-in or admin access to known IP addresses. Connect your office firewall to your own TunnelYard gateway, and your office reaches them from one dedicated IP that doesn't change.

Your officeFortiGate · 10.1.0.0/24Admin consolesallows your IPCRM and HRallows your IPSign-in rulestrusted locationYour gateway203.0.113.10static IPone IP to allow-listIPsec tunnelinternet, from 203.0.113.10

Connects to standard IPsec firewalls and routers

Why teams allow-list a TunnelYard IP

Yours alone, not shared

The IP belongs to your dedicated gateway. No other customer's traffic leaves from it, so allow-listing it lets in only your offices.

Not tied to your ISP

Change provider, add a backup line or move office: you update the tunnel, and the IP your apps trust stays the same.

Nothing to install on devices

The tunnel runs on the office firewall, so laptops, phones and printers on the office network use the IP without an app or a login.

How it works

Up and running in four steps

  1. 1

    Launch a gateway

    Pick one of 38 locations. It's ready in 10–15 minutes with its own static public IPv4.

  2. 2

    Connect your firewall

    Add a tunnel with your office's public IP and LAN subnets, export the config for your device and bring the IKEv2 tunnel up.

  3. 3

    Allow-list the gateway's IP

    Add the gateway's IP to the IP allow-list or trusted locations in each app.

  4. 4

    Keep watch

    Follow the tunnel's status and traffic in the dashboard, and get an alert when it has been down for 2 minutes.

Features you'll use

Built for this job

All features

Ready-made firewall configs

Configs for Cisco, Fortinet, Palo Alto, Juniper, MikroTik, pfSense, OPNsense, Ubiquiti and OpenWrt, and settings for any other IKEv2 device.

Firewall rules and P2P blocking

Decide what your offices can reach through the gateway, and block P2P and BitTorrent on every plan.

Alerts when the tunnel drops

Email on every plan, webhooks on Business, and Slack and Teams on Enterprise.

FAQ

Static IP allow-listing questions

What is IP allow-listing?

Many SaaS apps, admin consoles and sign-in services let you limit access to a list of trusted IP addresses, also called an IP whitelist or trusted locations. Connections from other addresses are blocked or asked for extra checks. With TunnelYard, that list needs one entry: your gateway's static IP.

Why not use the static IP from our ISP?

An ISP's static IP belongs to that line and that building. Change provider, add a backup line or move office, and the address changes, along with every allow-list that uses it. A TunnelYard gateway's IP stays the same, several offices can share it, and you choose the city it's in.

Do all devices in the office use the IP?

Devices on the LAN subnets you add to the tunnel send their internet traffic through it, so laptops, phones and printers use the gateway's IP without any app or login on the device.

Is the IP shared with other customers?

No. Each gateway is a dedicated server with its own static public IPv4. Only traffic from your offices leaves from it, so allow-listing it lets in only your people.

Can people working from home use the IP?

No. TunnelYard connects office firewalls and routers; there is no VPN app for individual laptops or phones.

Does it support IPv6?

Not yet. The static IP and the tunnels are IPv4 today, and IPv6 support is coming in a future version.

Get a static IP for your office

Launch a gateway, connect your firewall, and allow-list one IP today.