Blog

The TunnelYard blog

Guides, explainers and product updates for people who run IPsec.

Articles

Choosing IPsec proposals: what to use and what to retire

A practical guide to IPsec encryption, integrity, PRF and Diffie-Hellman groups for new tunnels, with recommended proposals and what to retire.

Read the guide

Policy-based vs route-based IPsec VPN: which to use

How each model decides what goes into the tunnel, what changes for traffic selectors and routing, how to mix the two, and when to pick which.

What is IPsec? How IPsec VPN tunnels work

IKE, ESP, security associations, tunnel mode and the ports to open: how the IPsec protocol builds an encrypted VPN tunnel between two networks.

pfSense IPsec VPN: site-to-site example configuration

Every Phase 1 and Phase 2 field for an IKEv2 site-to-site tunnel on pfSense, plus firewall rules, MSS clamping, the VTI option and how to check it works.

IPsec troubleshooting: why your VPN is not connecting, phase by phase

Reachability, IKE SA and child SA errors, tunnels with no traffic, MTU and flapping: what each symptom means and the commands to check it on each platform.

Cisco IPsec VPN configuration: IKEv2 VTI example for IOS XE

A complete IOS XE 17.x example of a route-based IKEv2 tunnel: proposal with PRF, keyring, IPsec profile, VTI, routing, verification and common problems.

FortiGate site-to-site IPsec VPN configuration for FortiOS 7.4

A complete FortiOS 7.4 CLI example of a route-based IKEv2 site-to-site VPN: phase 1 and 2, tunnel interface, static route, policies both ways and checks.

Get a static IP for your office

Launch a gateway, connect your firewall, and allow-list one IP today.